Power Amp Settings

While the Operating Class and Tube Configuration parameters can be modified from the front panel of your DT-Series amp, there are four additional amp settings that can only be modified via Midi commands (sent by a tool like DT Customizer).

From the Power Amp Screen you can modify the following settings:

• Power Amp Operating Class: A - A/B
• Power Amp Tube Configuration: Triode / Pentode
• Topology / Negative Feedback Loop Type
• 12AX7 Boost Mode: Bypass / Enable *
• Phase Inverter B+ Voltage: Low / High *
• Feedback Capacitor Type: Capacitor X (tight) / Y (smooth) *

*NOTE:

The annotated items are for DT50 amplifiers only. Also, the Boost Mode is functional only when Low Volume Mode is Off.